Category Archives: News & Press Releases

NEW SYNCHRONIZED WIPER CONTROLLER

SYNCHRONIZED CONTROLLER ENDS ANNOYING MISTIMED WIPER SWEEP

Windshield wipers that sweep asynchronous can be annoying while keeping watch. Schmitt & Ongaro Marine provides mariners a distraction-free view of the seas ahead with its new Synchronized Wiper Controller.

The unit simultaneously controls one to three motors for synchronized sweep at slow, fast or intermittent speeds. Users can select to wipe all the windscreens together or just the helm station.

The provided rocker power switch also runs the wash system. If the controller is set at slow sweep, it will speed up the motors while washing.

The innovative controller draws a maximum of 5A and is available in 12V or 24V. Both slow and fast speed settings have their own circuit for efficient operation and maximum torque. If a motor becomes overloaded, the power will break automatically.

Like all products from Schmitt & Ongaro Marine, the Synchronized Wiper Controller is built to the highest standards to reliably perform in a marine environment. It comes with a three-year warranty and has an MSRP of $244.85.

Contact Schmitt & Ongaro Marine Products, 1001 Ranck Mill Rd., Lancaster, PA 17602. 866-724-6488 (866-SCHMITT); Fax: 866-329-7679 (866-FAXSMSW). sales@schmittsteering.com. www.schmittongaromarine.com.

Introducing our New 11″ Stainless Steel Destroyer Wheel with Control Knob

DESTROYER WHEEL MAKES TURNING EASY WITH CONTROL KNOB

For ease of maneuvering, nothing beats a wheel control knob, especially in wet weather or when one hand is needed for the throttle. Schmitt & Ongaro’s new 11″ Destroyer Wheel comes complete with this must-have feature.

Smaller in diameter than a standard wheel, it serves well in tight and restricted locations. Ideal for any boat, it’s perfect for center consoles, fly bridges, RIBs, runabouts, crabbers and skiffs. When mounted on a stern helm station, it makes backing down safe and easy.

Crafted of strong, superior-grade stainless steel, the six-spoked wheel is highly polished for a low-maintenance, mirror-like finish. It’s ideal for both salt and freshwater. Its ball bearing knob spins even in the most grueling environments. With its black center cap and control knob insert, the 11″ Destroyer Wheel’s rugged good looks enhance any boat décor.

Developed for both refit and OEM, the solidly-built 11″ Destroyer Wheel with control knob fits a 3/4″ tapered shaft for ease of installation and maximum rigidity. With a 10° dish, it provides plenty of offset from the dash.

MSRP for Schmitt & Ongaro Marine’s model 1531111K-H Destroyer Wheel with control knob is $241.80.

Schmitt & Ongaro Marine Products is the industry’s foremost maker of innovative and exceptional quality marine steering wheels, horns, wiper systems, control arms and knobs, and accessories. Known for its superior customer service principles, the company offers some of the strongest product warranties in the industry.

FREE STAND LETS CUSTOMERS TAKE WHEEL FOR A TEST DRIVE

Feeling is believing—that’s why Schmitt & Ongaro is giving away a free wheel stand with the purchase of six of its steering wheels. The stands enable dealers and retailers to more easily display the Schmitt wheels. This merchandising opportunity will help distributors and dealers drive sales by putting a Schmitt & Ongaro wheel directly in the customer’s hands without leaving the showroom. The custom wheel stand is also available for purchase as a standalone item.

The superior quality of a Schmitt & Ongaro steering wheel becomes evident through both its visual appeal and its easy handling. The wheel stand encourages customers to experience the brand first hand. Whether they’re in the market for a fine stainless steel wheel or seek solid value with a polyurethane model, boat owners are sure to find a Schmitt & Ongaro product that suits their needs.

The sturdy black, powder-coated stand is fitted with four rubber feet to prevent it from moving or tipping. A mounting post with a heavy screw accommodates attachment of any standard 3/4″ tapered wheel. The wheel stand measures approximately 11″ H x 7.5″ W x 8″ D.

Waterproof Wiper Motor Keeps Boats Weather-Ready

When the weather is less than ideal, having a reliable wiper motor can make all the difference. The new standard waterproof wiper motor from Schmitt & Ongaro is designed for reliable wiper operation at all times and in all conditions.

Ideal for smaller boats, this durable single-speed motor combines the security of waterproof protection with excellent value. Like all Schmitt & Ongaro products, it’s been engineered to provide trouble-free service.

The Schmitt & Ongaro waterproof wiper motor features a 6.4 cm stainless steel shaft. Its aluminum housing ensures efficient heat dissipation and enhanced protection. CE-approved insulated grounding makes it suitable for use with steel, aluminum, wooden or GRP boats.

Exerting 5 N·m of torque, the 12V motor features an adjustable sweep angle of 80º to 110º ** and a self-parking gear to left or right. The unit accepts up to a 14 x 14 inch arm and blade. The wiper motor comes with a three-year warranty.

Carrying out a long tradition of providing high quality products and attentive customer service, Schmitt & Ongaro Marine Products designs, develops and tests its products in the US.

Contact Schmitt & Ongaro Marine Products, 1001 Ranck Mill Rd., Lancaster, PA 17602 USA. +1-717-431-2316; Fax: +1-717-431-2319. sales@schmittsteering.com. www.schmittongaromarine.com.

**This is a correction to the original press release. The wiper sweep can be adjusted between 80 – 110 degrees.**

IMPROVED HORNS STAY LOUD AND CLEAR EVEN WHEN WET

A loud, clear marine horn is an essential form of communication onboard. But rain, condensation, salt spray and other water sources can promote rust and mute its volume over time. To combat this problem, Schmitt & Ongaro has re-engineered its classic trumpet horn, creating a watertight instrument that shrugs off moisture.

One of the loudest on the market, with a rating of up to 125 db at 3′, this trumpet horn has always been a customer favorite. Now a small, unobtrusive draining feature makes it even better.

Accumulated water, whether from boat cleaning or wet conditions, drains through the hole. No matter how often the horn gets wet, it retains its original volume. The drain hole even allows the horn to be mounted at an upward- or downward-tilting angle without incurring water damage.

Constructed of 304 stainless steel, including the sealed sound unit, this horn is sleek and shiny. Both single and dual trumpet horn models are available in either 12 or 24 volt versions.

Schmitt & Ongaro offers a five-year warranty against rust on all its fully stainless steel horns. All meet ABYC A-23 for boats up to 39′ (single trumpet) and 65′ (dual trumpet). All horns come pre-wired and fit existing hole patterns. Retail prices for the stainless steel trumpet horns start at $120.

Contact Schmitt & Ongaro Marine Products, 1001 Ranck Mill Rd., Lancaster, PA 17602. 866-724-6488; Fax: 866-329-7679. Or contact sales@schmittsteering.com

Stainless Wheels Set Standard for Quality and Value

STAINLESS WHEELS SET STANDARD FOR QUALITY AND VALUE

A vessel’s steering wheel is likely the most handled equipment aboard. The new stainless steel Vision FX and Vision Elite wheels from Schmitt & Ongaro draw the eye as well. They offer all the beauty, craftsmanship and value expected from one of the industry’s pre-eminent makers of fine marine steering wheels.

Schmitt & Ongaro sets the industry standard for saltwater cast wheels. An optimized manufacturing method makes the new Vision models significantly lighter, which allows Schmitt to provide even greater value to the customer, while still maintaining the high polish, strength and precision performance afforded by a premium wheel.

The classic three-spoke design has patented finger grips to ensure a comfortable grip and excellent handling power. Solid marine-grade 316 stainless steel Vision wheels carry a lifetime anti-corrosion warranty.

The Vision FX wheel features precision-machined flange bearings, and is available both with and without a standard capped control knob. For the ultimate in durability and sleek good looks, the Vision Elite model comes equipped with an all-stainless steel control knob, fitted with glass ball bearings for smooth spinning action.

As with all Schmitt & Ongaro wheels, the smooth knobs have no exposed locknuts, bands or bolts to catch on sleeves. Their position on a spoke rather than the rim promotes ergonomic ease while permitting maximum helm clearance. Both Vision FX and Vision Elite models come in 34 cm or 39 cm diameters.

These new products will be on display at the Marine Equipment Trade Show (METS) from November 19-21 in booth 02.216 in Amsterdam, The Netherlands.

Contact Schmitt & Ongaro Marine Products, 1001 Ranck Mill Rd., Lancaster, PA 17602 USA. +1-717-431-2316; Fax: +1-717-431-2319. sales@schmittsteering.com. www.schmittongaromarine.com.

SCHMITT & ONGARO ADDS NORTHEAST REP

Schmitt & Ongaro Marine Products, a leading global supplier of marine steering wheels and horns, has announced that Thomas H. Connolly & Sons (TCS) will serve as its newest representative in the Northeast US. Pennsylvania-based Schmitt & Ongaro also offers wiper blades and motors, motor control arms and other custom accessories, all designed, developed and tested in the US.

Serving as a manufacturers’ representative since 1951, TCS prides itself on the trust it inspires in its clients and its reputation for integrity. The company’s four partners offer decades of collective marine industry experience, with a large territory covering the Northeastern and Mid-Atlantic states as well as Canada.

“TCS’ attention to detail, experience and connections in the industry provide the support our company demands, and will allow us to maintain our strong market position,” said Schmitt & Ongaro president Tim Schmitt. He noted that TCS represents a superior line of products and its excellent dealer relationships, with education and training programs, help support the entire distribution chain.

Contact Schmitt & Ongaro Marine Products, 1001 Ranck Mill Rd., Lancaster, PA 17602. 866-724-6488; Fax: 866-329-7679. sales@schmittsteering.com. www.schmittongaromarine.com.

EVO PRO WHEEL

Boat owners shouldn’t have to sacrifice comfort for elegant styling in a steering wheel. With a gleaming stainless steel center spoke, ergonomic polyurethane grip and control knob, Schmitt & Ongaro Marine’s Model 724 Evo Pro wheel provides the best of both worlds.

EVOPRO

Combining solid value with a luxurious appearance, the Evo Pro offers features owners expect in more expensive wheels. Cast 316 stainless steel construction ensures strength and durability. Molded to simulate fine hand-stitched leather, the poly grip contributes a plush look as well as optimal ease and handling.

Its contrasting combination of materials gives the Evo Pro a smart, sporty look, with a black hand grip, center cap and control knob setting off the high polish of the stainless steel. The control knob itself eliminates the need for hand-over-hand steering, allowing greater precision and control.

Easy to mount, the Evo Pro has a 19 mm (3/4″) tapered shaft and is offered in 343 mm (13-1/2″) and 394 mm (15-1/2″) wheel diameters. Schmitt & Ongaro thoroughly tests each of its stainless steel wheels and offers a lifetime warranty.

Contact Schmitt & Ongaro Marine Products, 1001 Ranck Mill Rd., Lancaster, PA 17602 USA. Phone: +1-717-431-2316; Fax: +1-717-431-2319.

E-mail: sales@schmittsteering.com.

Website: www.schmittongaromarine.com

SCHMITT CONTINUES GROWTH FIVE YEARS AFTER ONGARO ACQUISITION

In 2012 Schmitt & Ongaro Marine celebrated its 50th anniversary, and one year later, the company recognizes another milestone. It’s now the fifth anniversary of Schmitt’s acquisition of Ongaro Marine, a move which helped create more than 50% sales growth since 2010, to now record levels

Schmitt debuted its first stainless steel steering wheel at the 1962 New York City Boat Show. The company has since positioned itself as a leading marine accessories manufacturer. Acquiring Ongaro Marine in 2008 further broadened its product line, which is designed, developed and tested in the US. Ongaro Marine was founded in 1996 and known for its stainless steel electric horns, windshield wipers, and control arms.

Schmitt & Ongaro backs its products with some of the strongest warranties in the business, including a lifetime warranty on all its stainless steel wheels. “Through every stage of growth, our customer service and dedication to quality have remained unwavering,” said company president Tim Schmitt. “We are committed to developing and manufacturing innovative products of the highest quality, increasing boating and fishing enjoyment for everyone.”

Trumpet Horns Offer Beauty & Function

Boat horns are an important safety item, but boat owners don’t have to sacrifice beauty for function. Schmitt & Ongaro Marine Products has enhanced its stylish line of
single and dual trumpet horns with moisture-blocking resins and lubricants.

[sws_button_icon_ui label=”View Full Article” href=”http://www.yachtsmanmagazine.com/products/products_sep2012.html” ui_theme=”start” icon=”ui-icon-arrowthick-1-s” target=”_blank”] [/sws_button_icon_ui]